BHZPX - PORCELAIN BONDING AGENT

  • MSDS: BHZPX
  • Manufacturer: DEN MAT CORP
  • Product Name: PORCELAIN BONDING AGENT
  • National Stock Number: 6520-00F010893
Product Identification

Product ID:PORCELAIN BONDING AGENT
MSDS Date:03/31/1987
FSC:6520
NIIN:00F010893
MSDS Number: BHZPX

Responsible Party
DEN-MAT CORPORATION
3130 SKYWAY DRIVE #501
SANTA MARIA, CA 93455

Emergency Phone: (805) 922-8491

Info Phone: (805) 922-8491

Cage: 1GY48

Contractor
DEN-MAT CORPORATION
1729 SANTA MARIA, CA 93455

Telephone: 805- 922-8491/800-433-6628

Cage: 1GY48

Ingredients

N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SILICON TETRAHYDRIDE

CAS: 7803-62-5

RTECS: VV1400000

OSHA PEL 5 PPM

ACGIH TLV: 5 PPM; 9192

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE DRYNESS & IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: MAY CAUSE DRYNESS & IRRITATION.

First Aid

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES & CONSULT
PHYSICIAN. SKIN: FLUSH W/WATER.

Fire Fighting

Flash Point:35C
Lower Limits:1.5%
Upper Limits:11.0%
Extinguishing Media:CHEMICAL FOAM, CO2
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL & FLASH BACK IF
IGNITED. HEAT CAN CAUSE POLYMERIZATION & CAN RELEASE ENERGY WHICH
CAN CAUSE CONTAINER TO RUPTURE.

Accidental Release

Spill Release Procedures:ABSORB MATERIAL W/ABSORBENT TOWEL.

Exposure Controls

Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:124C
Vapor Pres:4
Vapor Density:2.5
Spec Gravity:0.82
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR SOLUTION W/SLIGHT PUNGENT ODOR
Percent Volatiles by Volume:95%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALKALI METALS
Stability Condition to Avoid:HEAT, IGNITION SOURCE
Hazardous Decomposition Products:CO
Conditions to Avoid Polymerization:CAN RELEASE ENERGY

Disposal

Waste Disposal Methods:DISPOSE ACCORDING TO GOVERNMENT REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.